To learn how to install gutter hangers, this post will educate you like a pro & DIY teaching results huge cost savings Gutters play the vital role of channeling out the water from the roofs to the municipal drainage in a manner that is smooth and seamless.
Like any other home center plumbing gadget, the gutters too, are susceptible to all manner of potential damages the may compromise their proper working.
They hence have to be firmly fixed and properly tightened to enable them to serve you well without any undue hindrances. To discharge this end, you will definitely need the gutter hangers. But just what are they? What are their kinds and how do they operate? We answer these questions in the proceeding discussions.
What is Gutter Hanger?
A gutter hanger is a special piece of equipment that is used to fix and attach the gutters firmly to your roofs. It works to see to it that your spout system is stable, more secure, and properly supported. In that way, it spares your hanging gutters from the associated risks like water damages, heavy rain, and harsh winds.
Types Of Gutter Hangers
As expected, there are different kinds of gutter hangers. Here, we delineate and explain them deeper:
The hidden hangers are so-called because they are largely out of the view of the passers-by and third parties. That is because they are fixed at the horizontal inclination inside the Aluminum gutters and screwed firmly thereafter into the fascia boards. The seamless and sleek designs also go a long way in concealing them.
Visible Spikes and Ferrules
This one comprises ferrules or metal tubes that are pushed across the gutters through to the back of the gutter thereof. After the ferrules are pushed across, the same is fastened to the fascia board. It serves to provide added support to the gutter system in the course of handling your loads.
Brackets and Straps
In this context, the hangers are wrapped around the hanging spouts after which the same is fastened to the fascia board. This arrangement adds some strength to the gutter structures overall. In this manner, the gutters stand a better chance of withstanding the extreme weather changes.
Reverse Curve Gutter Guards
These are derived from materials that are lighter in weight such as crown molding plastics and lightweight metal tubes. Over and above-being light, they too do not allow the waters to pass through them as they are impervious. They are particularly great at disposing of the leaves and other debris.
They are pretty similar to the screen guards as they possess a network of tiny holes that block the twigs and debris while at the same time give room for a larger amount of water to pass through. These guards are available in either the metallic mesh or the crown molding plastic materials.
Features a plastic grid or wire that fixes firmly in place by the actions of lifting the bottom rows of the roof shingles. Thereafter, it slides the same to the edges of the screen underneath in such a way as to hold the weights of the shingles firmly in place. For a large part, these systems require no tools to set up.
Gutter Parts & Mounting Details
A typical gutter comprises the following parts:
These are fasteners that play the role of fixing your downspouts to the sides of your home. In their basic shapes and forms, the pipe cleats are bent and bear the semblance of the clip. They are placed outside the downspouts and screwed to the brick or vinyl siding of your own home center.
Many a gutter supply comes in disparate shapes and forms. These require fixing together to achieve a common end. The miter plays this specific role. It is the one that facilitates the attachment of the constituent parts and pieces together to make one monolithic gutter that discharges all water.
They are the constituent parts and components that make the gutter up. It is these constituent parts and components that are fixed together to make for a monolithic structure. In many cases, they measure 5 or 6 inches wide and are shaped to channel the flow of running water smoothly.
Ferrules are small pieces of metals that are shaped in the forms of cylinders. They confer alternative ways of attaching the gutter sections to your house. That is mainly due to the use of the visible spikes to push through to the gutter and the fascia boards.
As the name implies, the end caps are attached to the seams of the funnel systems. Their role is to prevent stray water from exiting the seamless gutters prematurely. In a nutshell, the end caps are flat pieces of metals that are subsequently attached to the seams of the Aluminum gutters.
Shaped like the elbows of the arms, this part of the gutter supply is ordinarily fixed towards the end of the downspouts and plays the role of channeling the water away from the home. Alternatively, they may also be fixed on top of the downspout to join the same to the opening of the gutter.
Downspouts are enclosed vertical pipes that channel the flow of water from the gutters through to the ground or the municipal drainage mechanism. They are available either in rectangular or rounded shapes. Needless to say, you have to pick that which mirrors your expectations and space availability.
Gutter Hangers: Why Are They Essential
You will find the gutter hangers essential due to the following reasons:
Hold the Weights of the Gutters
The gutter hanger system work primarily to hold the weights of the Aluminum gutters firmly. That way, they give the gutters the leeway to accommodate many debris and other wastes in the course of channeling the flow of a larger amount of water from the roofs through to the municipal drainage below.
Prevent any form of Damages
From time to time, the areas you are in do sustain harsh storms and severe weather. These definitely have the attendant impact of posing some damages to the gutters and other roofing structures. The gutter hangers come in to prevent these damages by tightening the gutters firmly.
Prop the Gutters firmly in shape
For the gutters to work perfectly, they need to be propped in upright positions. The gutter hangers yet again come here to play this role. They maintain the seamless gutters in a shape, form, and stature that is upright and less obstructed. In the course of doing that, they enable the proper working of the gutters.
Facilitate the Drainage of the Rainwater
By virtue of holding the watercourse in upright positions, the gutter hangers also facilitate the discharge of the rainwater smoothly. They see to it that the gutters remain in the best shapes and forms all the while. On the same note, they ensure an unimpeded flow of the water.
Uphold the Structural Stability of your Building
The sum total of the benefits above all boil down to the upholding of the structural stability of your building. Your buildings are less likely to suffer the risks of water damages, heavy rain, and the weakening of the foundations as is the norm with most ordinary buildings.
Spikes Gutter System vs Hidden Hanger System
Two of these gutter hanger systems stand out. These are the spiked and the hidden gutter systems respectively. But how do they measure up? Let’s take a look at them:
Security and Strength
On the basis of the sheer strength, the spiked gutter is the stronger of the two items. That makes it more stable and well able to tackle the associated tasks fairly well. You will subsequently find the hidden hanger only suitable for those areas that hardly experience excessive storms and impacts.
Owing to the critical role it plays in safeguarding your roofs from the damages that come by, the spiked gutter is larger. A hidden hanger on the other hand is smaller and largely stays out of the view of the user or the passersby. The former is hence more suited for larger rain gutter installations.
Installation and Care
You will generally find the spiked gutter more difficult to install and make do with. That is due to the need to expend an excessively high degree of expertise to set it up. A hidden hanger being simple is similarly simpler and more convenient to install and maintain in the long run.
How To Install Gutter Hangers
Want to carry out rain gutter installation for your hanger? This section will help you out:
- Pop rivet gun
- Offset tin snips
- Hex head driver
- Extension ladder
- Duckbill tin snips
- Cordless drill
- Gutter sealant
- Gutter hanging strap
- Gutter flashing
- 1/8-inch medium length rivets
- 1 ¼-inch self-tapping hex head screws
- ¼-inch hex head screws (‘zippers’)
Now follow the procedures below to Install Gutter Hanger:
- Cut the half-round gutter
- Notch the gutter
- Fix the constituent sections together
- Rivet the constituent sections
- Caulk the seams
- Reassemble the parts
- Mark the downspout outlet
- Cut the outlet hole as per the gutter style
- Rivet the outlets in the Hole
- Mark out the gutter slope
- Screw the half-round gutter to the Fascia
- Introduce the gutter flashing
- Hook the gutter using the hanging straps
- Attach the elbows to the downspout of the gutter
- Crimp the end of the downspout
- Fasten the brackets to the walls
- Attach the downspout outlet to the brackets
5 Tips For Gutter Placement And Hanger Spacing
The tips below will help you to place the hangers and the gutters smoothly:
Select the right kind of gutter style
It all begins by choosing the right kind of a gutter. You might need the help and the support of a trained expert to arrive at the best one. Among the factors, you will have to consider are the materials used, size, style, and the desired longevity of use.
Compute the slope
You now have to compute the slope i.e. the angle of inclination that the gutter is to be to discharge the rainwater easily. Yet again, you may want to invoke technical assistance in all these. Of utmost importance is the fact that the slope does not allow for clogging when in use.
Place the gutter
Upon getting the exact measuring of the slope and the gutter right, you now have to place the same seamlessly on the specific portions of the roofline. By far the best location to do this is a few inches below the line. This is to minimize water damages, impacts of heavy rains, and the possibilities of clogging.
Arrive at an appropriate hanger spacing
Chances are that you will use more than one hanger at a time. Thus, you have to arrive at an appropriate hanger spacing as you set out. Generally, you have to leave out a 36-inch spacing between any two consecutive hangers.
Consider installing a flashing
To make matters better, you need to install a flashing as well. The role of the flashing is to make it impossible for the water to run behind your gutters. That way, it spares your fascia from the possibilities of rotting or sustaining adverse water damages in the course of handling and engagements.
How To Replace Gutter Hangers
Want to replace your gutter hangers? Follow the procedures stipulated below to achieve this end:
Remove the old gutter hangers
Start it out by removing the old gutter hangers. To do this, use a set of pliers to eliminate the existing hangers by unscrewing the same. You will have to exercise a great deal of due diligence to prevent inflicting further damages to the entire structure.
Install the new gutter hangers
Having eliminated the old gutter hangers, you have to put in place the new gutter hangers. You are advised to slot the hooked parts of the item to the outside corner segment of the gutter. Go ahead thereafter to press the gutter toward the façade of the home center.
Install extra hangers
As a last consideration, you are advised to install extra hangers than you had before. This should especially apply in the event that your hanger sags excessively or is not in a position to accommodate too much weight. The extra hangers serve to reinforce the strength of the hangers altogether.
Frequently Asked Questions (FAQ’s)
We now take a look at some of the questions surrounding the rain gutter system below:
How far apart should gutter hangers be?
A. 36 inches, it is! You may however have to make this distance smaller if you live in areas that experience less precipitation. The opposite also applies in areas that experience a higher amount or frequency of precipitation.
Can you hang gutters without fascia?
A. YES, you can! However, you will need the roof straps to use in case you want to bypass the fascia. They act to fasten and place the gutters firmly and securely to the outside corner.
Where should gutter downspouts be placed?
A. At least one downspout has to be fixed for every 40 linear feet of the gutter line. Then again, the same should not be discharged near the foundation of the house or close to standing water.
Are wider rain gutters system better?
A. YES, they are! Wider gutters are generally capable of accommodating more water and sparing your building structures of the damages that come along with excessive exposure to the weather changes.
How long can a gutter run be with one downspout?
A. 40 linear feet, it is! You are highly advised to fix one downspout after this exact measuring interval. Failure to adhere to this cardinal rule may overwhelm the system considerably.
There you have it! Having belabored the subject of how to install the gutter hangers exhaustively, we are now confident that you have the preparedness you need to go about this business exceptionally fine. With that in mind, we now challenge you to proceed with haste to the nearest hardware stores and purchase one for yourself. Feel free to reach us via the below contact form for any further inquiries.